CRY+™ Suggested Use Link SOP
CRY+™
Standard Operating Procedure (SOP)
CRY+™ features our largest granule size, with a 16x30 mesh size, enabling high-flow
processes while maintaining consistent output.
Safety: Please adhere to the safety and handling
instructions in the CRY+™ Safety Data Sheet (SDS), included with your shipment, available at
mediabros.store, or by emailing sales@mediabros.store.
Required Materials:
- CRY+™ Filtration Media
-
In-line Filtration Housing & Filter
- CRC Column Size: For best results, use a 4–6 inch diameter column.
- Filter: Optimized for use with a ≤5-micron screen filter followed by a 0.2-micron, Media Bros Ulti-Filter.
Recommended Conditions:
Solvent-to-biomass ratio: 6:1 to 10:1
Operating temperature: Below -10°C, will not clog due to ice
Flow rate: < 1 GPM. A needle valve or flow restrictor at the column base
improves flow control.
Procedure:
-
Determine your ratio. For every pound of biomass, load 200–300 grams
of CRY+™ into the filtration housing. The exact amount depends on biomass quality and desired
outcome. Refer to the quick reference table:
CRY+™ (Media Use Based on Grade)
Plant Matter Low Grade Medium Grade High Grade 1 lb 300g 250g 200g 2 lbs 600g 500g 400g 5 lbs 1,500g 1,250g 1,000g 10 lbs 3,000g 2,500g 2,000g 15 lbs 4,500g 3,750g 3,000g 20 lbs 6,000g 5,000g 4,000g 25 lbs 7,500g 6,250g 5,000g 30 lbs 9,000g 7,500g 6,000g 50 lbs 15,000g 12,500g 10,000g 100 lbs 30,000g 25,000g 20,000g - Secure filter screen and media. Ensure the filter screen is safely installed. A cloth or paper filter may be combined with a screen or plate. Load media directly into the column on top of the filter screen.
- No pre-wetting required. CRY+™ is designed to be used dry.
- Run extraction using a hydrocarbon-based solvent. Any lost yield can be recovered by flushing the media with pure solvent.
- Disposal. Follow all SDS instructions for safe disposal.
